In Use – Nock Co. Pen Cases

The guys at Nock Co. have certainly had their work cut out fulfilling the orders of over 2000 backers since the Kickstarter funding goal was reached at the end of October last year. As a backer of the “All the Cases” level (one of each case manufactured), my order was shipped towards the end of the process, however was well worth the wait.

For a little background, Nock Co. are Brad Dowdy from The Pen Addict blog and podcast, and Jeffrey Bruckwicki. From my original post last October about the project:

Brad has teamed up with Jeffrey Bruckwicki of Old Fourth Tailoring to design and manufacture pen cases (all hand-made in the USA), and in a nice touch, we see notebook case integration into some of the designs as well. The two appear to be a great fit (pardon the tailoring pun), and have created some fantastic designs which you really should check out for yourself, as any attempt at describing the products to you in words will not do the cases justice.

After posting one final update in late October on the progress of the Kickstarter funding drive, it was a case of waiting patiently for the goods to arrive.

NockCo_LabelUpon receiving the cases (seven in total) last week, I immediately filled The Brasstown, a zippered case with a six pen internal “tongue” rollout which emerges from the centre of the case; The Maryapple, a bifold notebook case, and both Chimneytop cases (more of a traditional type pen/pencil case shape).

As far as the construction and materials are concerned, these are high quality cases, made with 1000D nylon, lined with pack cloth (unless otherwise stated) to provide a nice protective housing for those precious pens, the closures finished with YKK zippers. The design of the cases and materials used ensure each keep their shape, yet are pliable enough to be tucked into the corner of a bag or backpack with no problems.

There is no question they are built to last and to be used – not sit on a shelf or in a drawer. These are your favourite denim jeans, not a tuxedo to be kept for special occasions. This is freedom for the pens you might otherwise have to leave at home – get out and use them.

How have the cases themselves performed? Pretty well so far.

The Brasstown

Probably my favourite case of the lot. Design genius, catering for up to six pens, each within their own pocket, in an internal pen roll. There is also room for pens, pencils, spare inks, erasers etc in “general population” within the main barrel of the case. It is nice and compact when closed, however unfurls to provide a nice open display of the six pens in the rollout section. For me? This case provides both protection for any pens I would prefer not to have banging around together, however is equally useful to house whichever pens are in high rotation at the time, providing easy organisation and convenient access, ensuring I never have to dig around looking for a specific pen.

The Brasstown

The Brasstown (above and right)


The centre roll accommodates all pen sizes, with the shorter and clipless Kaweco Sport disappearing down inside its pocket, however is easily extracted by simply sliding my thumb up the front material of the pocket and popping it out the top. All other clipped pens will simply sit securely in the pockets suspended by their clips in the usual manner. I can see this being my most used case, as it is the simplest way to carry my pens to and from work, knowing I have the six in the roll, along with any others (currently a further six disposable gel ink/rollerballs and a USB stick) in the main barrel of the case. As you can see from the image, my colour of choice was the Steel Exterior/Blue Jay interior combination.

The Maryapple

The Maryapple - interior

The Maryapple – interior

The bifold notebook case that is the Maryapple was also put to immediate use, given my usual practice of carrying two Field Notes notebooks along with the pens in my messenger style bag to and from the office. Why protect a Field Notes notebook? Are they not meant to be bruised and battered, showing the scars of heavy use, and then retired once full? Absolutely, and for myself, this will continue to be the case when carrying one in my pocket, however more often than not they are in my bag whilst commuting, and this is a great way of keeping them together.

Why two? One is used as a general catch-all for notes, ideas and numbers etc. The other is my coffee notebook, containing my roasting and tasting notes, along with any other coffee related information (blog post ideas, beans to try etc). Although my roasting is obviously all done at home, a good deal of tasting is done when out and about, or through my Aeropress brewing which occurs at the office.

The Maryapple - exterior

The Maryapple – exterior

Although two notebooks is generally my limit, this case would comfortably hold four Field Notes sized (approximately 9x13cm) books (two each side), or a couple of notebooks on one side, and a few pens in the other.

I made a similarly conservative colour choice here, going with the Midnight Exterior/Foliage Interior.

The Chimneytop(s)

The Chimneytop mini (L) and standard (R)

The Chimneytop mini (L) and standard (R)

These pop-up cases are my everything else cases, with the orange mini containing my Palomino pencil sharpener, a J. Herbin ink cartridge tin containing a selection of cartridges, and a screen cleaning cloth should my phone or iPad mini require it. I love the size of the mini, as it sits in my bag taking up essentially no room, however I can be sure of where those bits and pieces are should they be required.

The standard size Chimneytop currently houses my master store of ink cartridges, which, although sitting in my desk drawer, is a nice way of keeping them together.

Both Chimneytop cases are unlined, which to me is not a problem, for if they were to be used for pens, they would be those pens you would be happy to have all in together, and if this were acceptable, I don’t believe the lack of lining would be a concern.


Whichever way you look at them, Nock Co. cases are high quality, highly functional products that fit a specific niche in the market perfectly. I have often looked at other pen cases, however never really found anything to suit. More rigid leather pen holders seemed a little over the top, whereas the Nock Co. products provide a level of protection and functionality that I believe are unsurpassed, and they look pretty good too (though I acknowledge opinion on the aesthetics of such products is a highly subjective matter).

I am certainly spoiled for choice, having received one of each case manufactured, and believe me, they will all be put to good use. The remaining cases? Most likely to be filled as my pen collection grows, and of course backing the All Cases level was simply an investment in the future scale of both my pens and their cases – very wise!

I’d highly recommend considering these cases if you or your pen collection desire (or need) them. With the Nock Co. online store yet to open (sign up to be notified when that occurs here), there will be a short wait, however as I can attest – it will be worth it, and your pens will thank you.


Update – Nock Co. Kickstarter Project

This is an update to a post from earlier this month about Nock Co., and their Kickstarter project aimed at raising funding to manufacture high quality, hand made pen cases. At the time of writing, only 58 hours remain, with the project guaranteed to be funded on Wednesday, October 30, with things having gone pretty well to this point – currently at an amazing $70,000+ of the original funding goal of $5000.

As a backer set to receive one of each model manufactured, I will be waiting with much anticipation in January when the shipping date rolls around.

This would be a great time to get in before the initial funding period ends, both to give the boys at Nock Co. a bit of a kick along, and to guarantee yourself some pretty smooth merchandise once the manufacturing is complete.

For a look at what is on the way, head to the Kickstarter page, or to Nock Co. on the Web, Instagram, or Twitter.

Looking beyond the current fund raising, on a recent episode of the Pen Addict podcast, Brad Dowdy, aka The Pen Addict and co founder of Nock Co., remarked how keen he was to get through this initial phase and get the cases manufactured, as there are already a lot more great ideas for future Nock Co. products.

Cannot wait for those!

Nock Co. Kickstarter Project

Many pen-obsessed folk similar to myself have been waiting for the day to arrive when Nock Co. launch their Kickstarter campaign seeking funding to manufacture a series of high quality nylon pen cases. The project is now live – so get cracking!

Images: Nock Co. Kickstarter page

Images: Nock Co. Kickstarter page

In a post published on this blog back in June about my four favourite podcasts, you may recall The Pen Addict with Brad Dowdy and Myke Hurley was an inclusion in this list. For those who listen to the podcast, read the Pen Addict blog, or follow Brad on Twitter, the launch of this Kickstarter campaign will come as no surprise, however the email advising of the start to the campaign was a most welcome arrival in my inbox.

Brad has teamed up with Jeffrey Bruckwicki of Old Fourth Tailoring to design and manufacture pen cases (all hand-made in the USA), and in a nice touch, we see notebook case integration into some of the designs as well. The two appear to be a great fit (pardon the tailoring pun), and have created some fantastic designs (those pictured above are just two of many available) which you really should check out for yourself, as any attempt at describing the products to you in words will not do the cases justice. Depending on the model, the cases are either lined or unlined, and come in some cool launch colours (including a limited edition colour on a particular model that will only be available through this launch project).

You needn’t take my word for it that many are interested, with the $5000 funding goal being met within the first hour, and (at the time of writing) the project now supported to the tune of over $27,000, the numbers speak for themselves. All bar one ($25) of the 10 funding levels are still open, with 28 days left to run in the campaign. I understand the money raised will be used for additional manufacturing equipment which bodes well for the company in the longer term.

Enough from me – go check out Nock Co. on Kickstarter and be sure to watch the video outlining the project.

What’s that? Oh yes…sorry – my backing? That would be “All the Cases” at $75.00 (which is a steal for what you will receive). Told you I had been waiting for this day.