A View on Coffee Loyalty Cards

An interesting look at the concept of coffee shop loyalty cards came through my twitter feed recently, published by 2007 World Barista champion James Hoffmann (Twitter) on his site jimseven. He is also the Managing Director of Square Mile Coffee Roasters in East London.

They aren’t really loyalty cards, they’re more accurately described as discount cards. They are a fancy and convoluted form of coupons. Great coffee shops tend not to think of themselves as the sort of places that offer discount coupons but that is what loyalty cards are.

Let’s not fool ourselves: no one is loyal because of the card. No one is going to avoid other coffee shops simply because of the fact they carry a single loyalty card in their wallet for their favourite cafe.

I have often wondered on the real value of these systems, and agree wholeheartedly with Hoffmann’s comments, however I would also ask the question of whether anyone would really desert their favourite cafe if there suddenly was no card. If no one is loyal because of the card, I would venture to say no-one would necessarily be disloyal if they were suddenly without the card. I acknowledge I may be quite wrong about this.

Hoffmann’s point being, surely the only way to create loyalty to your cafe or brand is not through a discount programme, the design of which came from “companies with a commoditised product who were looking for a competitive edge” and goes on to point out specialty coffee is a “differentiated product, not a commoditised one”.

This led me to think on how I view these types of programmes, though given my interests in home roasting and coffee in general – am I biased? Could I really see this from the perspective of the average consumer? In posing these questions, there is no suggestion Hoffmann is struck with this bias, and if so, I do not see this as an issue, for it is those within an industry who must look at various issues from time to time and generate further thought and discussion. After all, it is often these types of initiatives that drift towards being “industry standards” without much question or analysis.

Why do I drink where I drink? The people, the quality, the blend, the ambience of a cafe? On thinking further about this, it comes down to two things for me – the coffee and the people. These two components control and influence the entire experience and quality thereafter.

The people
Primarily their passion for serving up consistently high quality coffee every single time I visit. I have waited a little longer at times whilst a barista has said, “sorry I’m not happy with that” and extracted the shot again. Knowing that the shot and resulting drink, whether short, long, with milk or without has been made with effort, and he or she has strived to achieve their best work with every cup is something that will keep me coming back time and time again.

I think those same characteristics then lead on to other facets such as the cleanliness of both machine and overall facility, and level of service in general. I’ve found that in striving to achieve the perfect cup, these cafés are (generally) not prepared to let standards slip in other areas either.

The Coffee
Am I sitting here writing this as an expert? Far from it. Am I an enthusiastic home roaster who blogs about my coffee roasts and brews? Absolutely, and am therefore part of a group of consumers who will take note of what I have described above when deciding where to consume coffee we don’t roast and brew ourselves. I love trying out new cafés, and generally try them a couple of times to assess consistency and perhaps allow for an off day, but everything that keeps me coming back will be evident quite soon in this vetting process.

When I say the coffee, I am talking about the brand, blend and how it is served. One café I faithfully attend every day, serves espresso based drinks with one full-bodied blend. Another I regularly visit serves espresso based drinks with the choice of house blend, or the single origin of the day, along with three additional Artisan Light Roasts served up through V60, Chemex, Siphon, or Aeropress methods – yes, absolute heaven for the enthusiastic consumer. All of these options are served with advice, great passion, and follow-up on how you enjoyed the result.

What’s my point about loyalty cards?
So what am I really trying to say here? Probably my main point is to question whether loyalty cards actually have any effect at all on consumer behaviour. Does a loyalty card really have any power in driving consumer behaviour, or is it something that is nice to have, is a little bonus, but in the end we would all visit our favourite cafe anyway, even if no loyalty programme existed. I can’t help but think the industry as a whole may have overestimated the effect of these programmes in the absence of any real measurable data (remember, non industry person speaking here).

I have always declined to use loyalty cards on the basis that I am, and always have been, happy to pay for a quality product with service to match. It is also interesting to immediately hear discussion and comment when visiting a cafe with a group, if prices are more expensive than what is expected (a discussion for another post) – never anything about loyalty cards. Try as I might, I just cannot imagine people going back to an unclean facility to drink something made by rude staff that is at best unappealing in taste – but then again it happens. As to why this occurs, I do not have an answer. Though to be fair, a cafe exhibiting all of these features would probably not survive for very long – but surely it is not simply because of a loyalty card. Surely?

Upon having my wife proofread this prior to posting, she informs me I am probably biased, and she believes many do use these cards extensively at multiple outlets, searching out the “freebies” that are on offer. So perhaps my point of view is inaccurate in relation to these loyalty programmes, however I would like to think that once these consumers have searched around, when they hit on a great cafe, the quality and service will ultimately trump the card.

Electronic Loyalty Cards
As Hoffmann suggests, newer electronic forms of these types of programmes may provide a way to gain more meaningful data on consumer patterns or preferences. Again, I am not familiar with usual cafe measures other than cups served or kilograms through the hopper per day, so am really not in a position to comment in detail on this. However, the very first loyalty programme I am actually using appears similar to the Harris and Hoole app Hoffmann links to and discusses in his post.

So, why am I using this one, given my comments above? Put simply, it makes the experience of ordering and paying easier, and reduces my wait time during a critical part of the day – on my way to work.

The app itself is called Beat the Q, and sits on the home screen of my iPhone (see left in image below). As the cafe is a very busy one, often a visit on my way to work required a wait that at times probably became a little longer than I would have liked.

Signage at the cafe promoted the use of this app, and after downloading and creating an account, I can now order through my phone as I get off the bus. By the time I reach the cafe, I have only to wait another couple of minutes at most, with my order being placed about 8 or 10 minutes prior to arriving. Upon speaking with the staff, at least as many if not more orders are received through this process than the standard walk up queue during the busy before work period.

Beat the Q

Beat the Q

The bonus? A free coffee upon signing up to the app (top ups via credit card or PayPal within the app), with the tenth coffee free (see right in image above). The app also saves your favourite order, and confirms with a notification when it has been received. The whole process is very smooth and works well. What it provides for the cafe in the form of additional data may be where this differs from traditional cards, though I would have thought similar data could be gained through the register. Perhaps not.

Would I turn off the tenth cup free option if I could? Maybe, but as long as I keep using the app that is a moot point, as it occurs automatically (though I do try to tip at least the value of the free drink over the course of the loyalty period or thereabouts). The only downside I see with this type of system is that it may result in a little less interaction between staff and customers if the entire experience occurs through this type of transaction. I guess only time will tell.

Conclusion
As I have pointed out earlier, I am merely an enthusiastic coffee consumer and home roaster who got thinking on this subject after reading Hoffmann’s thoughtful and well crafted post. My main aim when I purchase from a cafe is to support quality and passion, which ensures I will enjoy what I purchase, and am happy to pay for the privilege – and every cup I consume.

As to the value of loyalty programmes and where they should be headed? That is for those in the industry (such as Hoffmann) to decide, though I believe with further analysis and discussion on points such as these, we as consumers can only be better off.

Crop to Cup – Part 4

The fourth instalment in this Crop to Cup series looks at the final steps of processing, followed by the roasting of our “microlot” of coffee, kindly received straight off the tree from a barista friend about a month ago. As with anything, good things come to those who wait, and four weeks after starting, we are almost to the point of tasting the fruits of our labour.

To date, we have worked our way through Pulping, Fermentation (Crop to Cup – Part 1), Drying (Crop to Cup – Part 2), Drying again (yep – it took a while) (Crop to Cup – Part 3), and we continue on below.

4. Parchment Removal (Hulling)

In Part 3 of this series, drying continued in preparation for the final “hulling” or parchment removal prior to roasting. After a further two weeks drying (four in total) it was time to remove the parchment layer.

As I have written in previous posts, the beans being “dry enough” and the parchment ready for removal, is determined both by observing an appropriate drying time (approximately two weeks to a month), and having the parchment split easily off the inner bean upon attempted removal. According to the Department of Agriculture, Fisheries and Forestry (DAFF):

Inadequate drying – greater than 12 per cent moisture – will cause mouldiness and stale aroma during storage.

Upon proceeding with the hulling by hand (or rather thumbnail and finger), it is clear this is quite a labour intensive undertaking. After 1 hour, the parchment layer was removed from our crop, and we were a step further along in the process.

Photo 13-10-2013 5 41 17 am

Given the time and labour intensive nature of this part in the process, the DAFF suggests the following:

Place the beans, a small quantity at a time, in a food processor or similar type of blender. Use plastic blades to avoid breaking the coffee beans. Blend at low speed for approximately 30 seconds to remove the parchment from the beans.

My mother uses a similar approach, blending on low-speed for 8–9 seconds, which she finds removes much of the parchment layer without damaging the green bean inside. Whether done by hand or machine, you will be left with a fine outer layer of “silver skin” remaining on much of the bean. Enlisting the assistance of my son to provide a quick rubbing of the beans between his hands removed this final layer. Blowing away any remaining silver skin completes the process.

Photo 13-10-2013 5 47 51 am

We were now ready for roasting!

5. Roasting

With a dry weight of 35 grams, there was certainly no margin for error, and had me thinking I really should be calling this a “nanolot”, as “micro” probably doesn’t go far enough (yes an hour of hulling for 35 grams of green beans – as I said – very labour intensive!).

So proceed with care I did.

Photo 13-10-2013 6 01 02 am

The roast was undertaken via my usual breadmaker / heat gun set up which I have previously written about. The heat ramp was very slow, and the total roast time 12 minutes, with the beans pulled out 3 minutes after first crack. The result looked like a pretty even roast, and was cooled and bagged. A few days rest and it will be ready for tasting.

Photo 13-10-2013 6 07 14 am

Check back soon for the much anticipated taste test!

Crop to Cup – Part 3

photo (4)

Continued from Crop to Cup Part 1 and Part 2

If you have been reading this series of posts to date, you will know that for my wet processed micro lot I am following the steps listed below:

  1. Pulping
  2. Fermentation
  3. Drying
  4. Parchment removal (hulling)
  5. Roasting

The first two stages were outlined in Parts 1 and 2 of this series, along with the initial phase of stage 3, in which today we learn that patience is indeed a virtue.

3. Drying continued

Every day I walk past my drying rack, checking (and turning) the beans, as the remaining moisture is drawn out, courtesy of the great weather we have been having of late in South East QLD. No rain to speak of (though many gardens need it), and fairly low humidity (compared to usual levels) have made for what I would consider perfect ‘bean drying’ weather. Although the beans have been undercover and would not be directly affected by rain, the increased humidity and overall moisture in the air would likely have required a longer period of drying.

The ideal drying time?

For further information here we again refer to our two main sources:

The Department of Agriculture, Forestry and Fisheries (DAFF)

Whichever method of drying you use, the parchment on the coffee bean will dry to a pale straw colour and be brittle to touch. At this stage, test the dryness of the beans by removing the parchment by hand off several coffee beans. If dry, the bean inside should be greyish blue in colour, hard, and likely to break when bitten between the teeth, if not soft and chewy. If soft, continue the drying process.

The ‘methods’ of drying referred to above include the natural sun drying method I am following, or alternatively, a food dehydrator, which must be kept at 40 degrees celsius over the course of several days to complete the drying. Whilst a dehydrator may be a more rapid method of drying, some of the romance is lost, if I imagine hundreds of square metres of beans drying in the sun on a Colombian hillside. Though the strength of this argument wanes a little when my entire crop fits into my palms cupped together.

Anyway, for the current crop, sun drying it shall be.

My Mother

I usually leave it at least two weeks to dry out. Sometimes you might get away with 10 days or so, but two weeks just to be safe. Your best guide is to crack off the parchment layer with your thumbnail, and if you get a good split or cracking noise you can be fairly sure it is dry enough. Once I have removed this layer and simply have the green bean, a couple of days more drying will really finish them off.

We agreed that my planned two further weeks (making four in total) drying time would not be to the detriment of the end result (that is, be too long). The four week time frame is due to a holiday occurring in the middle of this process , rather than specifically planning a drying time of this length. I do note however this does coincide with the upper end of the 5–30 day recommendations of the DAFF.

Drying – Two Weeks In
As noted above, after two weeks I am now half way through my planned drying time and testing a couple of the beans would appear to show that everything is on track. You will see in the picture below that that the outer parchment is quite dry (it also comes away from the inner bean with a nice crack when pressure from my thumb is applied).

photo (5)

Referring to the DAFF instructions above, the bean is blue/grey in colour and feels reasonably hard, though I did not see the need to give it the ‘bite test’. In another two weeks I would expect the beans will be well and truly dry and begging to be roasted, at which time I will provide an update with another post.

In the mean time, have a look at my magazine Brew – Ways of Coffee on Flipboard for some great articles I have collected from around the web.

What’s Roasting #5 – Ethiopian Yirgacheffe and El Salvador Siberia

Ethiopian woman coffee farmer with basket of c...

Ethiopian coffee farmer (Photo credit: Wikipedia)

After aiming my recent roasting efforts towards blending, it’s time to get back to some of my favourite regions and sample some single origins. I will also post a further update in the Crop to Cup series in the near future, as we get closer to roasting and sampling.

So, in searching for a fruity African varietal, this Ethiopian Yirgacheffe came along through the good folks at Ministry Grounds, who also supplied the following roasting advice on this coffee:

Go easy on the heat early on, allowing a gentle drying period. But build some momentum up to the start of first crack. When the beans go exothermic, expect a temp rate drop and try and anticipate this. Not letting the rate rise drop too much will develop the sugars and fruit flavours fully. Don’t go near second crack!

Vista panorámica de la ciudad de Santa Ana (El...

Santa Ana (El Salvador) (Photo credit: Wikipedia)

At the same time I stumbled across a Central American variety in the form of the El Salvador Siberia Pacamara which placed 20th in the 2012 Cup of Excellence, and certainly read well in terms of its potential out of the roaster and into the cup:

Floral with green apple, pineapple and black cherry. Lovely honeycomb and sugarcane sweetness. A balanced cup.

I am looking forward to seeing whether the El Salvador lives up to the usual crispness of varieties from the Central American region, and likewise the usual blueberry explosion of the Yirgacheffe. Tasting review to follow soon.

 

Crop to Cup – Part 2

Coffee drying in the sun. Dolka Plantation Cos...

Coffee drying in the sun. Dolka Plantation Costa Rica (Photo credit: Wikipedia)

Continued from Crop to Cup Part 1.

With the fermentation phase now complete, we move on to the drying phase of processing. You may remember from the first part of this series, coffee processing is broken up into the following stages, as described by both the Queensland Department of Agriculture, Fisheries and Forestry, and my mother, who is very experienced and knowledgeable in these matters:

  1. Pulping
  2. Fermentation
  3. Drying
  4. Parchment removal (hulling)
  5. Roasting
  6. Grinding, strong and brewing

At the completion of Crop to Cup Part 1, we left the beans fermenting in water at stage 2 above. I was a little unsure of how long this may take (72 hours or up to a week), though armed with the knowledge this phase would be complete when the mucilage (slippery outer layer) was easily rubbed away. Daily testing was undertaken, until on day 7 (exactly as predicted by my mother), rubbing one of the beans between thumb and finger resulted in a slightly gritty/pebbly feel rather than a slippery one. Time then to move onto drying.

3. Drying
Once the beans have fermented for long enough, they are required to undergo a final wash and rinse, before being laid out on drying beds. In aid of passing down the coffee loving tradition to the next generation, my son was enlisted to rub off the mucilage, with repeated washes then performed to remove any remaining on the outside of the bean. Agitating the beans and replacing the water over three washes was sufficient to achieve this.

Washing

Looking back to our Department of Agriculture guide, the drying process is described as follows:

The beans should be spread out in a thin layer no more than 3 cm thick, stirred three times a day, and be protected from rainy weather. Drying in this way can take 5–30 days, depending on the seasonal weather pattern.

As you can see below, an initial drying of the beans was done on a small towel, before transfer to a drying rack to allow plenty of airflow around the beans. The rack is situated under cover to avoid any weather or dew, however sees the mid to late afternoon sun, which should assist with drying. Given the small crop I am processing, a single layer of beans was placed on the drying bed, with little chance of any mould formation (the reason for stirring daily), though I aim to ensure the beans is are turned regularly.

Drying

I hope you will join me in a couple of weeks for the next post in this series, where we will be up to removing the remaining parchment layer and roasting our crop!